Thermal Grizzly Intel 1851 Mycro Direct-Die Pro RGB V1

Thermal Grizzly Intel 1851 Mycro Direct-Die Pro RGB V1

Brak ocen

Producent: Thermal Grizzly
Kod producenta: TG-MY-DD-P-RGB-i1851-V1
Kod EAN: 4260711991165
Gwarancja: 24 miesiące

Dostępność:

Czas realizacji orientacyjnie 8-14 dni roboczych

NOWOŚĆ

Koszt wysyłki: od 0 zł
Darmowa dostawa od 800,00 zł

Cechy produktu

Socket

LGA 1851 Direct-Die
Top

Acetal
Kolor dominujący

Czarny
Pompa

Nie
Wyświetlacz

Nie
RGB

Tak

The Intel 1851 Mycro Direct-Die Pro RGB V1 is a water cooler optimized for the Intel LGA1851 platform, featuring a nickel-plated copper base plate and RGB lighting. The cold plate has micro cooling fins with low flow resistance. The cooler is placed directly on the chip of the delidded Intel CPU, ensuring the processor's heat takes the shortest possible path to the water loop. A list of all verified compatible processors is available online.

Product information "Intel 1851 Mycro Direct-Die Pro"

The Intel 1851 Mycro Direct-Die Pro RGB V1 features a jet system on the cooler's surface, and the slot width of the cooling channels has been optimized. The cooler’s cold plate is made of nickel-plated copper and is mounted directly onto the CPU chip. To do this, the motherboard’s Integrated Loading Mechanism (ILM) must be removed, and the CPU must be delidded. The nickel coating on the cooler plate acts as a barrier to prevent gallium-based liquid metal from diffusing into the copper, making multiple applications of liquid metal generally unnecessary.

Properties

Water cooler for direct-die installation
Microfin cooler made of nickel-plated copper
Replaces ILM and heat spreader
Cover made of acrylic and aluminum
G1/4-inch fittings
CPU compatibility list available online
Only for delidded CPUs! Caution: Warranty void!

Acrylic glass tempering and RGB lighting

Between the cold plate and the anodized aluminum cover is acrylic glass, which undergoes a annealing process after milling to relieve internal stresses. This reduces the risk of stress cracks during long-term use.

RGB LEDs are located under the aluminum lid, controllable via a 3-pin ARGB header (+5V/DATA/GND) on the motherboard. These LEDs illuminate the acrylic under the lid and the G1/4-inch fittings on the lid.

Compatibility Notice

The Intel 1851 Mycro Direct-Die Pro RGB V1 is only compatible with Intel CPU's that use the LGA 1851 socket.

Attention:

Removing the heatspreader (“delidding”) of a processor is at your own risk!

The manufacturer's warranty expires when the CPU is delidded! Damage caused by delidding the CPU is not covered by the manufacturer's warranty!

Removing the Integrated Loading Mechanism (ILM) of the mainboard may invalidate the manufacturer's warranty of the mainboard manufacturer!

Scope of Delivery

1x Intel 1851 Mycro Direct-Die Pro RGB V1
1x Pressure test certificate for 600 mbar
4x Cylinder head screws UNC thread 6-32 x 5 mm
1x Angle wrench with hexagon socket 2.5 mm
1x Torx T20 key

Color:	black, silver
Connector type:	3-pin
Lighting:	digital aRGB LEDs
Material:	Aluminum, acrylic, nickel-plated copper
Socket manufacturer:	Intel
Socket type:	LGA 1851
Threading:	G1/4" female